Panasonic P2 HD Camcorder Operating Instructions - Page 82
Displays in mode check only, SDI OUT, OUTPUT, MON OUT, SELECT, P2CARD STATUS, TOTAL, SLOT1
View all Panasonic P2 HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Displays in mode check only Display screens and menu options !LED screen FUNCTION screen SDI OUT GAIN (0 dB) DS.GAIN SHUTTER WHITE PRE. EXTENDER B.GAMMA MATRIX COLOR COR. FILTER ATW OUTPUT TYPE CHAR MON OUT OUTPUT SELECT P2CARD STATUS CHAR TOTAL SLOT1 SLOT2 AUDIO screen SAMPLE RES MIC POWER (MENU) FRONT REAR VR SELECT LEVEL CH1/2/3/4 F.VR R.XLR A. IN METER CH1/2/3/4 CH1/2/3/4 CH1/2/3/4 CH1/2/3/4 Status when displayed Displays menu options that become !LED lighting factors. z Indications selected through the menu option !LED are marked with [ ! ]. z Indications which may activate the !LED are marked with [ ]. Gain status DS. GAIN value Shutter status White balance status Extender status (EX2 or OFF) BLACK GAMMA status (ON or OFF) MATRIX status (A, B, or OFF) Color correction status (ON or OFF) Filter status ATW status Displays video output status and recording media information. Displays status of signals output from the SDI OUT connector Displays MEM/CAM status displayed with the SDI OUT MODE menu option. You can select the SDI OUT MODE menu option from the screen of the SYSTEM SETTING page. Displays format of signals output from the SDI OUT connector with HD-SDI/SD-SDI. Displays superimposition status of characters selected with the SDI OUT CHAR menu option as ON/OFF. You can select the SDI OUT CHAR menu option from the screen of the SYSTEM SETTING page. Displays status of signals output from the MON OUT connector Displays status of MEM/CAM selected with the MONITOR OUT MODE menu option. The MONITOR OUT MODE item can be selected from the screen on the SYSTEM SETTING page. Displays signal format set with the MONITOR OUT menu option as HD-SDI/ SD-SDI/VBS. The MONITOR OUT item can be selected from the screen on the SYSTEM SETTING page. Displays the position of the MON OUT CHARATER switch as ON/OFF. Displays the status of a P2 card inserted into the P2 card slot, and total space and remaining space for recording. The card status is indicated as: ACTIVE/ACCESSING/INFO READING/FULL/PROTECTED/ NOT SUPPORTED/FORMAT ERROR/NO CARD > [P2 CARD ACCESS LED and Status of P2 cards] (page 33). Displays the total space and remaining space for recording of a P2 card inserted into the P2 card slot 1 and 2. Displays the status of a P2 card inserted into the P2 card slot 1, and total space and remaining space for recording. Displays the status of a P2 card inserted into the P2 card slot 2, and total space and remaining space for recording. Displays audio settings and selection status of each recording channel Displays the number of audio recording bits. Displays menu setting status for power provided to the microphone. Displays status of power supplied to the front microphone, selected with the FRONT MIC POWER menu option, as ON/OFF. You can select the FRONT MIC POWER menu option from the screen of the MAIN OPERATION page. Displays whether the rear AUDIO IN connector is set to not supply power to the microphone with the REAR MIC POWER menu option. OFF: power is not supplied. ON: supplies power when the switch is at MIC +48 V ON. VR SELECT Displays whether the audio level adjustment knob is selected to enable either CH1/2 or CH3/4 with the VR SELECT menu option. You can select the VR SELECT menu option from the screen of the MAIN OPERATION page. Displays the recording level adjustment method selected for each channel. VR: manual adjustment with the adjustment knob MENU:manual adjustment with the menu LVL CONTROL CH# menu option (# is the channel number) AUTO: automatic adjustment Displays with ON/OFF whether the F.AUDIO LEVEL control is enabled for channels to which VR (manual adjustment with the adjustment knob) is selected above. Displays with ON/OFF the selection status of the REAR XLR AUTO CH1/2 and REAR XLR AUTO CH3/4 menu options that automatically select rear input when a connector is connected to the rear AUDIO IN XLR connector. You can select each menu option from the screen of the MAIN OPERATION page. Displays the input status of each channel as FRONT (front)/REAR (rear)/W.L. (wireless). Displays the recording level of each channel. 82 Adjustments and Settings for Recording : Viewfinder Screen Status Displays