Home » Panasonic Manuals » Video Cameras » Panasonic P2 HD Camcorder » Manual Viewer

Panasonic P2 HD Camcorder Operating Instructions - Page 94

Turn the JOG dial button to select a desired, number 1 - 8. Then, press the dial button.

View all Panasonic P2 HD Camcorder manuals

Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

14 To exit the menu, press the MENU button. The settings menu disappears and the status of the unit is indicated at the top and bottom of the viewfinder screen. 5 Press the JOG dial button to display the following message: ‹Notes z It is possible to overwrite the setup file on the unit with a setup file from another device. Note that if the file is overwritten, the original setup file from the other device will be lost. z We recommend managing the respective SD memory cards on the respective devices independently. To read data on an SD memory card Select the type of the menu to read from the screen in advance, and then perform the reading from the SD memory card via the following procedure. 1 Navigate the menu to the screen. READ? YES # NO 6 Turn the JOG dial button to move the cursor to YES. Then, press the dial button. When the data has been read, the following message appears: To select a file number 2 Turn the JOG dial button to move the cursor to the menu option R. SELECT. Then, press the dial button. < SD CARD READ/WRITE > # R.SELECT 1 READ W.SELECT 1 WRITE CARD CONFIG TITLE READ TITLE: 1: ******** 2: ******** 3: ******** 4: ******** 5: ******** 6: ******** 7: ******** 8: ******** 3 Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button. To read data on a selected file 4 Turn the JOG dial button to move the cursor to the option READ. < SD CARD READ/WRITE > R.SELECT :1 # READ W.SELECT :1 WRITE CARD CONFIG TITLE READ TITLE: 1: ******** 2: ******** 3: ******** 4: ******** 5: ******** 6: ******** 7: ******** 8: ******** READ OK The data will not be read if any of the following messages appears when the JOG dial button is pressed: Error message Remedy READ NG Insert an SD memory card. NO CARD (No SD memory card inserted.) READ NG FORMAT ERROR (SD memory card not properly formatted.) The card has not been formatted using the unit. Replace the card. READ NG NO FILE (No file found.) Write file data. READ NG Only data written with the unit is ERROR readable. (SD memory card not readable.) READ NG CANNOT ACCCESS (SD memory card not accessible.) Example: The SD memory card is not accessible because it is being played back. After the operation in process, read data. 7 To exit the menu, press the MENU button. The settings menu will be replaced by status indications for the unit. 94 Adjustments and Settings for Recording : Handling data

Section	Page
Read this first!	2
General	8
Features of Camera unit	9
Features of Recorder/player unit	10
Features of the Input/Output unit	12
Other features	12
Dimensions drawing	13
Color TV Standard Settings (Settings for frame frequency)	14
System Configuration	15
Parts and their Functions	16
Power Supply and Accessory Mounting Section	16
Audio (input) Function Section	18
Audio (output) Function Section	20
Shooting and Recording/Playback Functions Section	21
Menu Operation Section	25
Time Code Section	26
Warning and Status Display Functions	27
Display Window Functions	28
LCD Monitor	29
Viewfinder	30
Recording and Playback	32
P2 Cards	32
How to handle data recorded on P2 cards	34
Basic Procedures	35
Normal Recording	37
Normal Recording and Native Recording	37
PRE-RECORDING function	38
Loop Recording	39
Interval Recording	39
ONE CLIP REC Function	42
Recording Review Function	44
Normal and Variable Speed Playback	45
Text Memo Function	45
Shot Mark Function	46
Recording Setting and Operation Mode	46
Adjustments and Settings for Recording	47
Multi Format	47
Video system and Recording format	47
Selecting a recording signal and method	47
Recording formats and output connector signal formats	48
Adjusting the White balance and Black Balance	49
Adjusting the White Balance	49
Setting Color Temperature Manually	51
Adjusting the Black Balance	52
Setting the Electronic Shutter	53
Shutter Modes	53
Setting the Shutter Mode and Speed	54
Placing the Camera-recorder in SYNCHRO SCAN Mode	54
Assigning Functions to USER Buttons	55
Setting the Switchover of USER SW GAIN	56
Selecting Audio Input Signals and Adjusting Recording Levels	57
Selecting Audio Input Signals	57
Recording level adjustment	58
Setting External Reference Signal and GENLOCK	61
Locking video signal to external reference signal	61
Setting Time Data	62
Description of time data	62
Recording time code and user bits	63
Setting of the User bits	64
Setting the Internal Clock’s Date and Time	66
Setting the Time Code	67
Externally Locking the Time Code	68
Providing an ID to the Camera	72
Setting UMID Information	73
CTL Count Setting and Display	74
Viewfinder Screen Status Displays	75
Lamps in the Viewfinder Screen	75
Mode Check Screen Displays (MODE CHK function)	75
Selecting Viewfinder Display Information	76
Viewfinder Status Indication Layout	76
Display Modes and Setting Changes/adjustment Result Messages	85
Setting the Marker Displays	86
Marker Check Screen Displays (MARKER SELECT button function)	86
Checking Return Video Signal in the Viewfinder	86
Adjusting and setting the LCD monitor	87
Selection of video output signals	88
Settings of signals output from SDI OUT connector	88
Settings of signals output from MON OUT connector	89
Handling data	90
Handling SD memory cards	91
Formatting, Writing and Reading an SD memory card	91
How to Use the User Data	95
How to Use Scene File Data	96
Resetting Menu Option Settings to Defaults	99
Lens file	99
How to provide lens files	99
To save the lens file into the built-in memory	100
To read the lens file from the builtin memory	101
To write in and read out the lens file to/from the SD memory card	102
Chromatic Aberration Compensation (CAC)	104
Preparation	108
Power Supply	108
Mounting the Battery and Setting the Battery Type	109
Use of the external DC power supply	110
Mounting the Lens and Performing the Flange Back and White Shading Adjustments	111
Preparing for Audio Input	114
When Using the Front Microphone	114
When Using a Wireless Receiver	114
When Using Audio Devices	115
Mounting the Camera on a Tripod	115
Attaching the Shoulder Strap	116
Attaching the Rain Cover	116
Attaching the F.AUDIO LEVEL control Knob	117
Connection of the DC OUT connector and the external REC strat/stop switch	117
Manipulating Clips with Thumbnails	118
Thumbnail Manipulations Overview	118
Thumbnail Screen	119
Selecting Thumbnails	121
Playing back Clips	121
Switching the Thumbnail Display	122
Changing Thumbnails	123
Shot Mark	123
Text Memo	124
Deleting Clips	126
Restoring Clips	126
Reconnection of Incomplete Clips	127
Copying Clips	127
Setting of Clip Meta Data	128
Formatting a P2 Card	131
Formatting SD memory cards	131
Setting the Thumbnail Display Mode	132
Properties	133
Connection with external device	136
Connection with external devices using the USB 2.0 port	136
Connection with a PC in the USB DEVICE mode	136
USB HOST mode	137
Switching to the USB HOST mode	137
Using the USB HOST mode	137
Connection using the SDI IN connector	142
Connection of the remote control unit (AJ-RC10G)	143
Connection of the extension control unit (AG-EC4G)	145
Maintenance and Inspections	146
Inspections Before Shooting	146
Preparing for Inspections	146
Inspecting the Camera Unit	146
Inspecting the Memory Recording Functions	147
Maintenance	148
Cleaning Inside the Viewfinder	148
Phenomenon Inherent to CCD Cameras	148
Replacing the Backup Battery	148
Connector Signals	149
Warning System	153
Warning Description Tables	153
Error Codes	155
Card Warning Code	156
Warning and Error Display for Thumbnail Operation and USB HOST MODE	156
Menu	158
Menu Configuration	158
Setting Menu Options	160
Selecting Options for USER MENU	161
Menu Description Tables	162
SYSTEM SETTING	162
PAINT	169
VF	177
CAM OPERATION	181
MAIN OPERATION	187
FILE	193
MAINTENANCE	196
OPTION MENU	198
Updating the Firmware incorporated into the unit	199
Specifications	200

Match case Limit results 1 per page

Adjustments and Settings for Recording

Handling data

To exit the menu, press the MENU button.

The settings menu disappears and the status of the unit

is indicated at the top and bottom of the viewfinder

screen.

Notes

It is possible to overwrite the setup file on the unit with a

setup file from another device. Note that if the file is

overwritten, the original setup file from the other device will

be lost.

We recommend managing the respective SD memory cards

on the respective devices independently.

Select the type of the menu to read from the <SD CARD R/

W SELECT> screen in advance, and then perform the

reading from the SD memory card via the following

procedure.

Navigate the menu to the <SD CARD READ/

WRITE> screen.

Turn the JOG dial button to move the cursor to

the menu option R. SELECT. Then, press the

dial button.

Turn the JOG dial button to select a desired

number (1 - 8). Then, press the dial button.

Turn the JOG dial button to move the cursor to

the option READ.

Press the JOG dial button to display the

following message:

Turn the JOG dial button to move the cursor to

YES. Then, press the dial button.

When the data has been read, the following message

appears:

The data will not be read if any of the following messages

appears when the JOG dial button is pressed:

To exit the menu, press the MENU button.

The settings menu will be replaced by status indications

for the unit.

To read data on an SD memory card

To select a file number

< SD CARD READ/WRITE >

R.SELECT

READ

W.SELECT

WRITE

CARD CONFIG

TITLE READ

TITLE:

1: ********

5: ********

2: ********

6: ********

3: ********

7: ********

4: ********

8: ********

To read data on a selected file

< SD CARD READ/WRITE >

R.SELECT

READ

W.SELECT

WRITE

CARD CONFIG

TITLE READ

TITLE:

1: ********

5: ********

2: ********

6: ********

3: ********

7: ********

4: ********

8: ********

Error message

Remedy

READ NG

NO CARD

(No SD memory card inserted.)

Insert an SD memory card.

READ NG

FORMAT ERROR

(SD memory card not properly

formatted.)

The card has not been formatted

using the unit.

Replace the card.

READ NG

NO FILE

(No file found.)

Write file data.

READ NG

ERROR

(SD memory card not readable.)

Only data written with the unit is

readable.

READ NG

CANNOT ACCCESS

(SD memory card not

accessible.)

Example: The SD memory card

is not accessible because it is

being played back.

After the operation in process,

read data.

READ?

YES

READ OK