Ricoh Aficio MP 6001 SP Operating Instructions - Page 66

3. Troubleshooting When Using the Facsimile Function Problem Cause Solution Edges of sheets are creased. The paper is damp. Use paper that has been stored in the recommended temperature and humidity conditions. See "Paper Storage", About This Machine . Edges of sheets are creased. You are using nonrecommended paper. 3 Images are only partially The paper is damp. printed. Use recommended paper. See "Recommended Paper Sizes and Types", About This Machine . Use paper that has been stored in the recommended temperature and humidity conditions. See "Paper Storage", About This Machine . Black lines appear on the print produced at the destination. The ADF, exposure glass or Clean them. See "Maintaining Your scanning glass is dirty. Machine", About This Machine . Background of received images appears dirty. Images from the back of the page appear. Image density is too high. Adjust the scan density settings. For details about how to change the density, see "Density (Contrast)", Facsimile Reference . Received image is too light. When using moist, rough, or processed paper, areas of print may not be fully reproduced. Use recommended paper. See "Recommended Paper Sizes and Types", About This Machine . Received image is too light. The image density has been set too low. Increase the scanning density. For details about how to change the density, see "Density (Contrast)", Facsimile Reference . Received image is too light. The original of the transmitted Ask the sender to reprint the original on fax was printed on paper that thicker paper and fax it again. is too thin. 64