Ricoh Aficio MP 7500 S/P General Settings Guide - Page 130
Input/Output, Switch to Batch, SADF Auto Reset, Rotate Sort: Auto Paper Continue
View all Ricoh Aficio MP 7500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Copier/Document Server Features Input/Output This section describes various items of [Input / Output] under [Copier / Document Server Features]. Default settings are shown in bold type. ❖ Switch to Batch You can select to have Batch mode or SADF mode displayed when you press the [Special Original] key. 3 • Batch • SADF ❖ SADF Auto Reset In SADF mode, an original must be set within a specified time after the previous original has been fed. You can adjust this time from 3 to 99 seconds in increments of 1 second. The timing is set to "5 second(s)" by default. ❖ Rotate Sort: Auto Paper Continue You can specify to continue copying when paper of the required orientation has run out during rotatesorting. • On Copying continues using copy paper of a different orientation. The copy job will finish even if you have left the machine. • Off When paper of the required orientation runs out, the machine stops copying and prompts you to supply copy paper. After you have loaded paper, the machine will continue copying. ❖ Copy Eject Face Method in Glass Mode You can specify the way in which copies are delivered when copying an original placed on the exposure glass. • Face Up • Face Down ❖ Copy Eject Face Method in Bypass Mode You can specify the way in which copies are delivered when copying in Bypass mode. • Face Up • Face Down 122