Ricoh Aficio MP 7500 S/P General Settings Guide - Page 35

Network Settings Settings Required to Use Network TWAIN Scanner This section describes necessary set items for using TWAIN Scanner under the network environment. 1 Ethernet This section describes necessary set items for using network TWAIN Scanner with Ethernet cable. For details about specifying the settings, see "Interface Settings" and "File Transfer". Heading Setting Item Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Setting Requirements Mandatory As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network LAN Type Interface Settings/Network Ethernet Speed Interface Settings/Network Permit SNMPv3 Communication Interface Settings/Network Permit SSL/TLS Communication Interface Settings/Network Host Name As required Mandatory Mandatory As required As required As required As required Note ❒ As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒ [LAN Type] is displayed when optional wireless LAN interface board is in- stalled. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.55 "Interface Settings" p.65 "File Transfer" 27