Ricoh Aficio MP 7500 S/P General Settings Guide - Page 26

Connecting the Machine Heading Setting Item Setting Requirements File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required 1 Note ❒ As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒ [LAN Type] is displayed when optional wireless LAN interface board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒ When setting [POP before SMTP] to [On], also make setting for[Reception Protocol] and [POP3 / IMAP4 Settings]. ❒ When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail Communication Port]. Reference p.55 "Interface Settings" p.65 "File Transfer" IEEE 1394 (IPv4 over 1394) This section describes necessary set items for sending e-mail with IEEE 1394 interface cable. For details about specifying the settings, see "Interface Settings" and "File Transfer". Heading Setting Item Interface Settings/IEEE 1394 IPv4 Address Interface Settings/IEEE 1394 DDNS Configuration Interface Settings/IEEE 1394 Host Name Interface Settings/IEEE 1394 Domain Name Setting Requirements Mandatory As required As required As required Interface Settings/IEEE 1394 WINS Configuration As required Interface Settings/IEEE 1394 IPv4 over 1394 Mandatory Interface Settings/Network IPv4 Gateway Address Mandatory Interface Settings/Network DNS Configuration Interface Settings/Network Effective Protocol File Transfer SMTP Server File Transfer SMTP Authentication File Transfer POP before SMTP File Transfer Reception Protocol File Transfer POP3/IMAP4 Settings File Transfer Administrator's E-mail Address File Transfer 18 E-mail Communication Port As required Mandatory Mandatory As required As required As required As required As required As required