Ricoh Aficio MP 7500 S/P General Settings Guide - Page 67
Parallel Interface, Machine Name, Parallel Timing, Parallel Communication Speed
View all Ricoh Aficio MP 7500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Interface Settings ❖ Machine Name Specify the machine name. Enter the machine name using up to 31 alphanumerical characters. Parallel Interface This section describes various items of [Parallel Interface] under [Interface Settings]. [Parallel Interface] is displayed when this machine is installed with the IEEE 1284 2 interface board (optional). ❖ Parallel Timing Sets the timing for the control signal of the parallel interface. • ACK Outside • ACK Inside • STB Down ❖ Parallel Communication Speed Sets the communication speed for the parallel interface. • High Speed • Standard ❖ Selection Signal Status Sets the level for the select signal of the parallel interface. • High • Low ❖ Input Prime Sets whether to validate or invalidate the input prime signal upon receipt. • Active • Inactive ❖ Bidirectional Communication Sets the printer's response mode to a status acquisition request when using a parallel interface. • On • Off When set to [Off], bidirectional communication function will be disabled. Also, printer driver will not be installed under Windows Auto Detect function. ❖ Signal Control Sets procedure to error during printing. • Job Acceptance Priority • Printer Priority 59