Ricoh Aficio MP 7500 S/P General Settings Guide - Page 29

Network Settings Settings Required to Use Scan to Folder Function This section describes necessary set items for sending file. 1 Ethernet This section describes necessary set items for sending file with ethernet cable. For details about specifying the settings, see "Interface Settings" and "File Transfer". Heading Setting Item Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Setting Requirements Mandatory Mandatory As required As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Interface Settings/Network Ethernet Speed Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communication Interface Settings/Network Permit SSL/TLS Communication Interface Settings/Network Host Name File Transfer Scanner Resend Interval Time File Transfer Number of Scanner Resends Mandatory As required Mandatory As required As required As required As required As required Note ❒ As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒ [LAN Type] is displayed when optional wireless LAN interface board is in- stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.55 "Interface Settings" p.65 "File Transfer" 21