Ricoh Aficio MP 7500 S/P General Settings Guide - Page 14
Connecting to the Ethernet Interface, Make sure the main power switch on the machine is Off.
View all Ricoh Aficio MP 7500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connecting the Machine Connecting to the Ethernet Interface Connect 10BASE-T or 100BASE-TX cable to the Ethernet interface. 1 Important ❒ If the main power switch is turned "On", turn it "Off". A A ferrite core for the Ethernet cable is supplied with this machine. The Eth- ernet cable loop should be about 15 cm (5.9 inch) (1) from the machine end of the cable. AEV047S B Make sure the main power switch on the machine is "Off". C Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port. AMM007S D Connect the other end of the Ethernet cable to a network connection device such as a hub. 6
Connecting the Machine
6
1
Connecting to the Ethernet Interface
Connect 10BASE-T or 100BASE-TX cable to the Ethernet interface.
Important
❒
If the main power switch is turned "On", turn it "Off".
A
A ferrite core for the Ethernet cable is supplied with this machine. The Eth-
ernet cable loop should be about 15 cm (5.9 inch) (1) from the machine end
of the cable.
B
Make sure the main power switch on the machine is "Off".
C
Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port.
D
Connect the other end of the Ethernet cable to a network connection device
such as a hub.
AEV047S
AMM007S