Ricoh Aficio MP 7500 S/P General Settings Guide - Page 17

Connecting to the Interfaces Connecting to the IEEE 1394 Interface Connect the IEEE 1394 interface cable to the IEEE 1394 interface board. A Connect the IEEE 1394 interface cable to the IEEE 1394 port. 1 AMM010S B For IEEE 1394 (SCSI print) connection, plug the other end of the cable into the interface connector on the host computer. Make sure about the shape of the connector to the computer. Fasten the connector securely to the computer. Note ❒ Use the interface cable supplied with the IEEE 1394 interface board (op- tional). ❒ Make sure the interface cable is not looped. ❒ Two interface ports are available for connecting the IEEE 1394 interface ca- ble. Either is suitable. ❒ For details about installing the printer driver, see "Preparing the Machine" Printer Reference. Reference "Turning On the Power" About this machine "Preparing the Machine" Printer Reference Connecting to the IEEE 1284 Interface Connect the IEEE 1284 interface cable to the IEEE 1284 interface board. A Make sure the main power switch on the machine is "Off". If the main power switch is turned "On", turn it "Off". B Turn off the main power switch of the host computer 9