Ricoh Aficio MP 7500 S/P General Settings Guide - Page 164

Scanner Features ❖ Wait Time for Next Original(s): SADF When dividing originals and scanning them separately with the ADF to form a single file, select [Set Wait Time] or [Continuous Wait] for the waiting status. • Continuous Wait • Set Wait Time: 60 second(s) This setting is valid if [SADF] is specified for [Original Feed Type] when scan- ning. If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals with the number keys. Scanning will start automatically if additional originals are placed within this time. You can end scanning and begin transmission by pressing the {#} key within this time. Once the speci- fied time has elapsed, transmission starts automatically. If [[Continuous Wait] is selected, the machine will wait for the additional origi- nals until the {#} key is pressed. Scanning will start when additional originals are placed and the {Start} key is pressed. You can end scanning and begin sending by pressing the {#} key. 5 Even if originals are placed on the exposure glass, the machine will operate according to the specified settings. However, every time originals are placed on the exposure glass, you must press the {Start} key to start scanning. Scan- ning will start if additional originals are placed and the {Start} key is pressed within this time. You can end scanning and begin transmission by pressing the {#} key within this time. Once the specified time has elapsed, transmis- sion starts automatically. If originals are placed in the auto document feeder (ADF), transmission will start without waiting for additional originals after all originals in the ADF have been scanned, regardless of the specified settings. If a paper misfeed occurs or any of the following operations is performed while the machine is waiting for additional originals, the countdown stops and does not start again until the {#} key is pressed. • Changing the settings such as the scan settings • Opening the upper cover of the ADF • Pressing the {Interrupt} key to activate the copy mode Reference p.3 "Accessing User Tools (System Settings)" "Batch, SADF", Scanner Reference "Items for Specifying Scan Settings", Scanner Reference "Setting Items for Original Feed Type", Scanner Reference "Scanning Multiple Pages of Originals as One File", Scanner Reference 156