Seagate Mirra Personal Server User Guide (Windows) - Page 136
Returning to Factory Defaults
View all Seagate Mirra Personal Server manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
You must wait until your Personal Server is completely shut down before disconnecting power. If you disconnect power while it's running or while it's in the process of shutting down, your backed up files can become corrupted. Wait until both lights beside the power button are off before disconnecting power. If you hold down the power button for longer than four seconds or pull out the power plug before you shut down the Personal Server, the next time you launch the Mirra software, you see a popup warning in the System Tray: Figure 9~3 Improper Shutdown Warning Returning to Factory Defaults Caution: Read the follows instructions carefully before you begin your factory reset. To erase the contents of your Personal Server and return all settings to the factory defaults, Step 1: If possible, use your Mirra desktop application to remove all backups from your Personal Server. Step 2: Use Add/Remove Programs to uninstall the Mirra PC software from your computer. Step 3: Press the power button in the following sequence while your Personal Server is running: (a) Press the power button three (3) times in quick succession. Although a beep follows each button press, the beeps usually occur more slowly than the button presses. Do not slow down your button presses to wait for the beeps. Press the button rapidly 3 times. (b) After you've pressed the button for the third time, wait 10 to 15 seconds until the Personal Server beeps quickly 3 times in succession and the amber light flashes 3 times. (c) Again press the power button 3 times. Mirra Manual for Windows Release 2.2 128