Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 11

s Selecting & Editing Parameters Most SY85 edit screens contain several parameters that can be selected and edited. In most cases you can simply operate the continuous slider immediately below the parameter you want to edit on the display. Operating a slider automatically moves the underline cursor to the corresponding parameter. In the example below, for example (this is the VOICE EDIT mode Oscillator screen), the [CS5] slider can be used to adjust the "Fine" parameter. OSC``Wave``````Mode`Fine`Note`Rndm``Rvs` P001`Piano`````norm```+0```+0````0``off` The parameters can also be edited by first moving the cursor to the required parameter by pressing the corresponding function key ([F7], for example, would select the "Rndm" parameter in the above display), and then by using either the data entry dial or the [-1] and [+1] keys to adjust the parameter's value. The illustrations here are not available. In some special cases you'll also use the function keys as parameter "switches," and the [SHIFT] key is sometimes called into play to access secondary functions. Such exceptions are described in the appropriate sections of the manual. 10 GENERAL EDITING PROCEDURE