Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 189

7: COPY MEASURE [SONG] → [A]~[H] → [SONG JOB] → [MENU] → 7:Copy Measure → [ENTER/YES] Copies a specified measure or range of measures from one track to the specified measure in another track. This job is not available when the rhythm track (track 9) is selected. SONG`JOB`Copy```From`Meas``````To`Meas 1Ê(TR1``001ø`001)`TR1``001` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 From Meas (Source measure range, track, copy count) Range: Measures: 001 ... 999. Track: TR1 ... TR8. Count: 1x ... 99x Controls: [CS3] ... [CS6], [-1] [+1], Dial To Meas (Destination track & measure) Range: Track: TR1 ... TR8. Measure: 001 ... 999. Controls: [CS7], [CS8], [-1] [+1], Dial Use [CS4] to specify the track from which the data is to be copied, [CS5] and [CS6] to select the first and last measures of the range to be copied, and [CS3] to specify the number of times the selected data is to be copied. Use [CS7] to specify the destination track, and [CS8] to specify the destination measure. Press [ENTER/YES] to begin the copy procedure. The following confirmation display will appear: SONG`JOB`Copy```From`Meas`Are`you`sure 1Ê(TR1``001ø`001)`TR1``001` Press [ENTER/YES] again to confirm that you want to go ahead with the copy operation (which will overwrite data in the destination track), or press [EXIT/NO] to cancel. When the data has been copied, "Completed!" will appear briefly on the display. A copy operation overwrites the data from the beginning of the specified destination measure with the data from the source measure(s). Previous data in the overwritten measures is therefore lost. 188 SONG EDIT MODE / SONG JOB