Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 287

s Memory Installation CAUTION Memory Installation can erase internal memory! Be sure to safe all internal data to disk or card before installing memory. 1 Turn the SY85 power switch OFF, and disconnect the AC power cord from the mains outlet. 2 Place the SY85 face down on a stable, padded surface. 3 Locate the small cover on the bottom panel, and remove the six screws that hold it in place (figure 1). The illustrations here are not available. 4 Below the cover you will see two recessed panels. The left panel has slots for two SYEMB06 Memory Expansion Modules, while the right panel accomodates two SIMM memory modules. While both SIMM modules must be installed at the same time, you can install either one or two SYEMB06 modules, as required. 286 APPENDIX / WAVE MEMORY EXPANSION