Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 199
Velocity Modify
View all Yamaha SY85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
15: VELOCITY MODIFY [SONG] → [A]~[H] → [SONG JOB] → [MENU] → 15:Velocity Modify → [ENTER/YES] Increases or decreases the velocity values of all notes in the specified track and range of measures. This job is not available when the rhythm track (track 9) is selected. SONG`JOB`Vel.Modify``Meas``````Rate`Ofst 001ø`001``000%``+0` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Meas (First & last measure numbers) Range: 001 ... 999 Controls: [CS5], [CS6], [-1] [+1], Dial Rate (Velocity ratio) Range: 000 ... 200 Controls: [CS7], [-1] [+1], Dial Ofst (Offset) Range: -99 ... +99 Controls: [CS8], [-1] [+1], Dial Use the GROUP [A] through [H] keys to select the track on which the velocity modify operation is to be performed (A = track1, B = track 2, and so on). The LED of the selected track will glow red while the LEDs of all other tracks containing data glow green. Use [CS5] and [CS6] to specify the first and last measure numbers in the range of measures over which you want to modify the velocity data. Use [CS7] to set the "ratio" between the lower and higher velocity values (a setting of "100%" maintains the original relationship between the notes, lower values produce a narrower dynamic range, and higher values produce a broader dynamic range). Use [CS8] to specify the amount of offset ("-" settings reduce the velocity while "+" settings increase the velocity). Press [ENTER/YES] to begin the velocity modify procedure. The following confirmation display will appear: SONG`JOB`Vel.Modify``Meas``````Rate`Ofst Are`you`sure`?```````001ø`001``000%``+0` Press [ENTER/YES] again to confirm that you want to go ahead with the velocity modify operation, or press [EXIT/NO] to cancel. When the velocity data has been modified, "Completed!" will appear briefly on the display. 198 SONG EDIT MODE / SONG JOB