Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 205

3: INSTRUMENT CHANGE [PATTERN] → [JOB] → [MENU] → 3:Inst Change → [ENTER/YES] Allows a specified instrument (key) in one or all patterns to be changed to any other. This makes it possible to change all occurences of one instrument to a different instrument in one easy step. PTN`JOB`Inst`Change```````Ptn``From``To` [PTN]`ALL```````I00```C1```C1` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 PTN, ALL Range: PTN, ALL Controls: [F1], [F2] Ptn (Pattern number) Range: 00 ... 99 Controls: [CS6], [-1] [+1], Dial From Range: C1 ... C6 Controls: [CS7], [-1] [+1], Dial, Keyboard To Range: C1 ... C6 Controls: [CS8], [-1] [+1], Dial, Keyboard Press [F1] if you want to change an instrument in one pattern, or [F2] if you want to change an instrument in all patterns. If you select "PTN", the current pattern name is shown between parentheses on the lower display line and [CS6] can be used to select the pattern in which an instrument is to be changed. Use [CS7] ("From") to select the key corresponding to the instrument to be changed, and [CS8] ("To") to select the key corresponding to the new instrument. The "From" and "To" keys can also be directly specified via the keyboard when the cursor is located at the corresponding parameter. Press [ENTER/YES] to begin the instrument change procedure. The following confirmation display will appear: PTN`JOB`Inst`Change```````Are`you`sure`? [PTN]`ALL```````I00```C1```C1` Press [ENTER/YES] again to confirm that you want to go ahead with the instrument change operation, or press [EXIT/NO] to cancel. When the instrument has been changed, "Completed!" will appear briefly on the display, then the display will return to the pattern play mode. 204 PATTERN EDIT MODE / PATTERN JOB