Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 39

2: SEND SELECT & LEVEL [PERFORMANCE] → [EFFECT EDIT] → [MENU] → 2:Send → [ENTER/YES] The parameters provided here determine to which of the SY85 effect stages the output from the voice assigned to each layer is sent, and at what level. It is also possible to control the effect send level via keyboard dynamics and key scaling. EF`Send``Switch`Levl`VelS`Kscl ``Layer=A(¡A1)```1a/-`2a/b`127```+0```+0 F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Layer Range: A, B, C, D Controls: [CS2], PROGRAM [1] ... [4], [-1] [+1], Dial Selects the layer to be edited. The name of the voice assigned to the selected layer is shown between parentheses on the upper line of the display. Switch 1a, 1b/2a, 2b Range: See text below. Controls: [CS4]/[CS5], [-1] [+1], Dial Determines to which of the EFFECT 1 and EFFECT 2 effect stages the output from the current layer is sent. The [-1] and [+1] keys can then be used to turn the stage on ("a" or "b") or off ("."). The [CS4] and [CS5] sliders select the following settings in sequence: CS4 (EFFECT 1) 1./. 1a/. 1a/b 1./b (a and b off) (a on, b off) (a and b on) (a off, b on) CS5 (EFFECT 2) 2./. 2a/. 2a/b 2./b (a and b off) (a on, b off) (a and b on) (a off, b on) If a "single" type effect is selected then only stage "a" can be selected. If a "dual" or "cascade" type effect is selected, then both stages "a" and "b" can be selected. An effect stage that cannot be selected is represented by "-" on the display. 38 PERFORMANCE EDIT MODE / EFFECT EDIT