Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 242
From/To
View all Yamaha SY85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
From/To Range: 00 ... 63 Controls: [CS4]/[CS5], [-1] [+1], Dial Press [F1] to turn wave assignment on. If wave assignment is turned off, "--" appears in place of the "From" and "To" parameters. Use [CS4] and [CS5] to specify the range of samples to be assigned to the waveform. [CS4] specifies the first sample ("From") and [CS5] specifies the last sample ("To") in the range to be assigned. If both the "From" and "To" parameters are set to the same sample number, then only that sample is assigned to the waveform. If, for example, "From" is set to "2" and "To" is set to "5", then sample numbers 2, 3, 4, and 5 are assigned to the waveform. q 2: WAVE NAME l If not already selected, press the PAGE [ ] key to select this screen. This function can be used to assign a name of up to 8 characters to the current sample. WAVEFORM`Name InitWave" [CLR][UPR][LWR][SPC F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Name Range: See character list, below Controls: GROUP, PROGRAM, [F1] ... [F4], [F7], [F8], [CS1] ... [CS8], [-1] [+1], Dial Use the [F7] function key to move the character cursor to the left, and the [F8] function key to move the cursor to the right. Use the GROUP and PROGRAM keys to input a character at the cursor position. Each GROUP or PROGRAM key selects the three characters printed above it in sequence. It is also possible to use the [-1] and [+1] keys or dial to scroll through the available characters (see list below). The sliders, [CS1] through [CS8], independently select characters for the corresponding character position: [CS1] selects the first character, [CS2] selects the second character, and so on. The first four function keys also perform important functions: [F1] clears the entire name, [F2] selects upper-case characters for GROUP and PROGRAM key entry, [F3] selects lower-case characters for GROUP and PROGRAM key entry, and [F4] inserts a space at the cursor position. WAVE EDIT MODE / EDIT 241