Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 231
Mdr Save/load
View all Yamaha SY85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
q 2: MDR SAVE/LOAD This utility is used to move MDR data between the internal memory and disk. A SAVE operation saves MDR data from the internal memory to the specified disk file number, and a LOAD operation loads MDR data to the internal memory from the specified disk file number. MDR NEW LOAD]SAVE```````Disk=01``¥`Internal```` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Press the [F1] key to highlight "LOAD" on the display if you want to load MDR data from the disk into the SY85 internal memory, or press the [F2] key to highlight "SAVE" on the display if you want to save MDR data from the internal memory to the disk. Next, use [CS5] to select the number of the disk file (00 through 99) that you want to load from or save to. Press [ENTER/YES] to begin the MDR disk load or save procedure. If you select "SAVE", you have the option of pressing the [F2] key to give the data file a name before it is saved (the name is displayed above the file number - unnamed files are automatically named "--NEW--*"). If you choose the "NAME" option, enter the file name in the normal way (see page 95), then press [ENTER/YES] to begin the disk load or save procedure. The following confirmation display will appear: MDR NEW--*>`Are`you`sure`? [LOAD]SAVE```````Disk=01``¥`Internal```` Press [ENTER/YES] again to confirm that you want to go ahead with the disk load or save operation, or press [EXIT/NO] to cancel. When the data has been loaded or saved, "Completed!" will appear briefly on the display. See page 321 for information on disk error messages. 230 UTILITY MODE / DISK