Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 230

q 1: MDR IN/OUT This utility allows MIDI bulk data to be received from an external device and stored in the SY85 internal memory, after which it can be saved to disk by using the MDR SAVE utility, described next. In the same way, MIDI bulk data that has been loaded into the SY85 memory from disk using the MDR LOAD utility can be transmitted to an external device. MDR Block`Count=000` `[IN]`OUT``INIT```Interval=01`DataNo=01` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Up to 16 different MDR files can be retained in internal memory. Use [CS8] ("DataNo") to select the number of the file to be initialized, transmitted, or received. The "Interval" parameter, adjustable from 01 to 10 via [CS6], sets a delay interval between transmitted data to conform to the timing requirements of some MIDI devices. Normally the "Interval" parameter can be set at "01" unless your receiving device has trouble receiving data from the SY85. Initializing the MDR Memory Press [F3] ("INIT") and then press [ENTER/YES] twice to initialize (clear) the selected file number. "Completed!" appears briefly when the data has been initialized. Receiving MDR Data Press [F1] ("IN") and then [ENTER/YES] to receive the data to the current file number. The number of data blocks received is displayed on the upper display line during reception. Transmitting MDR Data Press [F2] ("OUT") and then [ENTER/YES] to transmit the data in the current file number. The number of data blocks transmitted is displayed on the upper display line during transmission. "Completed!" appears briefly when the data has been transmitted. UTILITY MODE / DISK 229