Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 215

MIDI PROGRAM BANK CHANGE MESSAGE "00H" "20H" MODE 00 00 00 03 00 06 00 00 09 01 Voice 00 04 00 07 00 0A 00 40 00 00 43 41 Performance 00 44 00 20 00 23 00 26 00 29 Voice 00 21 (multi) 00 24 00 27 00 2A 00 50 00 53 Performance 00 51 (multi) 00 54 MEMORY Internal1 Internal2 Internal3 Internal4 Card1 Card2 Card3 Card4 Internal1 Internal2 Card1 Card2 Internal1 Internal2 Internal3 Internal4 Card1 Card2 Card3 Card4 Internal1 Internal2 Card1 Card2 When "tbl" (table) is selected, transmission conforms to the program change table (see "4: PROGRAM CHANGE TABLE," below), while reception is the same as in the "drct" mode, above. Bulkprot (Bulk receive protect) Range: off, on Controls: [CS6], [-1] [+1], Dial Enables or disables bulk data reception. When this function is set to "off," the SY85 will automatically receive a bulk dump of voice, multi-play or system data from an external device connected to its MIDI IN terminal when the appropriate bulk dump data is received (assuming that the SY85 and transmitting device are both set to the same device number). Turn bulk in protect "on" to disable bulk dump reception (this prevents accidental disruption of the SY85 during use). 214 UTILITY MODE / SYNTH SETUP