Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 134

5: WET:DRY BALANCE [VOICE] → [EFFECT EDIT] → [MENU] → 5:Wet:Dry Balance → [ENTER/YES] The balance between the direct sound of the voice and the effect sound is a delicate thing. Even slight changes can make a big difference to the final sound. The parameters provided in this screen provide precise balance control. EF`Wet:Dry`Balance Out1=``40®:`60``````Out2=``16`:`84` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Out1 Wet/Out2 Wet Range: 0 ... 100 Controls: [CS3]/[CS7], [-1] [+1], Dial These parameters and the corresponding "Out1 Dry" and "Out2 Dry" parameters, below, work together to balance the effect ("wet") and direct ("dry") signals delivered via the EFFECT 1 and EFFECT2 processors. Higher "Wet" values produce more effect sound in relation to the direct, dry sound of the voice. Although the "Wet" and "Dry" parameters can be set independently, adjusting one will cause the other to change so that their total is always 100(%). If a controller is assigned to the "Out1 Wet" or "Out2 Wet" parameter (page 136), an inverse "c" will appear to the right of the parameter. Out2 Dry/Out2 Dry Range: 0 ... 100 Controls: [CS4]/[CS8], [-1] [+1], Dial These parameters and the corresponding "Out1 Wet" and "Out2 Wet" parameters, above, work together to balance the effect ("wet") and direct ("dry") signals delivered via the EFFECT 1 and EFFECT 2 processors, respectively. Higher "Dry" values produce more direct, dry sound in relation to the effect sound. Although the "Wet" and "Dry" parameters can be set independently, adjusting one will cause the other to change so that their total is always 100(%). If a controller is assigned to the "Out1 Dry" or "Out2 Dry" parameter (page 136), an inverse "c" will appear to the right of the parameter. DRUM VOICE EDIT MODE / EFFECT EDIT 133