Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 135

6: SEND & EFFECT 2 MIX LEVEL [VOICE] → [EFFECT EDIT] → [MENU] → 6:Mix Level → [ENTER/YES] These parameters determine the mix level between each effect send and the output of the preceding effect stage. Refer to the section beginning on page 254 for details on the overall SY85 effect system. EF`Mix`Level```EF2``Insert`1b```2a```2b F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 EF2 Mix (Effect 2 mix level) Range: 0 ... 100 Controls: [CS4], [-1] [+1], Dial Mixes the output of the EFFECT 2 processor with that of the EFFECT 1 processor. This parameter can only be used with the "serial" effect mode is selected. If any other mode is selected ("off" or "para"), "---" appears on the display in place of the value. If a controller is assigned to the EF2 Mix parameter (page 136), an inverse "c" will appear to the right of the parameter. Send 1b, 2a, 2b (Send level) Range: 0 ... 100 Controls: [CS6], [CS7], [CS8], [-1] [+1], Dial These parameters mix the dry signal sent to the corresponding effect stage with the output of the preceding effect stage. The higher the value the greater mix level. If the current effect configuration does not allow one of these mix parameters, "--" will appear in place of the mix level parameter. If a controller is assigned to the one of these parameters (page 136), an inverse "c" will appear to the right of the parameter. 134 DRUM VOICE EDIT MODE / EFFECT EDIT