Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 211

1: SYSTEM [UTILITY] → [SYNTH SETUP] → [MENU] → 1:System → [ENTER/YES] This screen includes several parameters that affect overall operation of the SY85. SYNTH`SYSTEM```NtShft`Tune`CtrlRst`Local 0````+0``````off```on F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 NtShft (Note shift) Range: -63 ... +63 Controls: [CS4], [-1] [+1], Dial, Shifts the overall pitch of the SY85 up or down in semitone steps. A setting of "-12," for example, shifts the pitch down by one octave; a setting of "+4" shifts the pitch up by a major third. Tune (Master tuning) Range: -63 ... +63 Controls: [CS5], [-1] [+1], Dial, Fine tunes the overall pitch of the SY85 in approximately 1.17-cent steps (a "cent" is 1/100th of a semitone). The maximum minus setting of "-63" produces a downward pitch shift of almost three-quarters of a semitone, and the maximum plus setting of "+63" produces an upward pitch shift of the same amount. A setting of "0" produces no pitch change. CtrlRst (Control reset) Range: off, on Controls: [CS7], [-1] [+1], Dial Determines whether controller settings (modulation wheel, pitch bend, breath controller, foot controller, etc.) are held ("off") or reset ("on") when voices or multi-play setups are switched. If this function is set to "off," then if, for example, you have applied modulation to a voice via the modulation wheel and switch to a new voice while maintaining the same modulation wheel position, then the same amount of modulation will be applied to the new voice. If "on" is selected, than all controller values are reset when a new voice or multi-play setup is selected. 210 UTILITY MODE / SYNTH SETUP