Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 54

4: PERFORMANCE INITIALIZE [PERFORMANCE] → [JOB] → [MENU] → 4:Initialize → [ENTER/YES] When you want to program a totally new performance combination "from scratch," rather than editing an existing combination, use this function to initialize all performance parameters. PERFORMANCE`JOB`Initialize EDIT]`LYR F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Press [F6] if you want to initialize the entire performance combination currently in the edit buffer, or [F7] if you only want to initialize one specific layer. If you choose [F7], use the [CS8] slider to select the layer you want to initialize. Press [ENTER/YES] to begin the initialize procedure. The following confirmation display will appear: PERFORMANCE`JOB`Initialize Are`you`sure EDIT]`LYR Press [ENTER/YES] again to confirm that you want to go ahead with the initialize operation (which will erase all current edited data), or press [EXIT/ NO] to cancel. When the performance data has been initialized, "Completed!" will appear briefly on the display, then the display will return to the mode that was engaged prior to calling the performance initialize function. PERFORMANCE EDIT MODE / JOB 53