Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 194
Remove Event
View all Yamaha SY85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
11: REMOVE EVENT [SONG] → [A]~[H] → [SONG JOB] → [MENU] → 11:Remove Event → [ENTER/YES] Allows pitch bend, after touch, program change, or control change events (data) to be removed from a specified measure or range of measures in a specified track. This job is not available when the rhythm track (track 9) is selected. SONG`JOB`Remove`````Event``````Meas PB```````001ø`001` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Event (Event type & No. if "ctrl" selected) Range: PB, AT, crtl, pgm Controls: [CS5], [CS6], [-1] [+1], Dial Meas (First & last measure numbers) Range: 001 ... 999 Controls: [CS7], [CS8], [-1] [+1], Dial Use the GROUP [A] through [H] keys to select the track containing the measures from which you want to remove events (A = track1, B = track 2, and so on). The LED of the selected track will glow red while the LEDs of all other tracks containing data glow green. Use [CS5] to select the type of event to remove: "ctrl" for control change, "pgm" for program change, "AT" for aftertouch, and "PB" for pitch bend. Removing a program change ("pgm") event also removes control change number 0 and 32 (bank select). If "ctrl" is selected, [CS6] can be used to specify a control number to be removed (see below). Use the [CS7] and [CS8] sliders to select the numbers of the first and last measures in the range of measures from which the specified event data is to be removed. Press [ENTER/YES] to begin the remove event procedure. The following confirmation display will appear: SONG`JOB`Remove`````Event``````Meas````` Are`you`sure`?````````PB```````001ø`001` Press [ENTER/YES] again to confirm that you want to go ahead with the remove event operation, or press [EXIT/NO] to cancel. When the data has been removed, "Completed!" will appear briefly on the display. SONG EDIT MODE / SONG JOB 193