Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 152

4: EFFECT SEND LEVEL [SONG] → [MULTI EDIT] → [MENU] → 4:Effect Send Level → [ENTER/YES] The ability to individually adjust the effect send level for each voice in a multi setup allows the optimum amount of effect to be applied to each voice. MULTI`EF`SendLevel`1-`8``````` `127ƒ`127ƒ`127ƒ`127ƒ`127ƒ`127ƒ`127ƒ`127ƒ F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 SendLevel k l Range: 0 ... 127 Controls: [SHIFT CS1] ... [CS8], [-1] [+1], Dial k l Only eight voice numbers are shown on the display at one time. Use the PAGE [ ] and [ ] keys while holding the [SHIFT] key to switch between multi instruments "1 ... 8" and "9 ... 16". The currenty selected group of voices is indicated on the upper display line. Use the [CS1] through [CS8] sliders to adjust the effect send levels of voices 1 through 8 or 9 through 16, respectively. The name of the currently selected voice is shown in the upper right corner of the display. Voices that are turned off are indicated by "---" on the display. A setting of "0" produces no effect, while a setting of "127" produces maximum send level and therefore maximum effect sound. The vertical bar graphs next to each parameter provide a visual indication of send levels - the longer the bar the higher the send level. Please note that if the "Source" parameter in the "2: SEND SELECT & LEVEL" screen (page 167) is set to "VCE" or "PFM" for any instrument, the send level of that instrument cannot be changed. In this case "(vce)" will appear on the display in place of the send level value. SONG EDIT MODE / MULTI EDIT 151