Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 52
Layer Exchange
View all Yamaha SY85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2: LAYER EXCHANGE [PERFORMANCE] → [JOB] → [MENU] → 2:Layer Exchange → [ENTER/YES] This function can be used to eliminate the audible effects of slight note delays that can occur in the performance play mode. The notes played by layers A, B, C, and D are sounded in sequence in the performance play mode. Normally the delay is so slight that it is not audible. If a voice with a sharp attack is assigned to one of the later layers (C or D), however, the delay can "soften" the attack of the voice. The problem can be overcome by using this function to exchange layers A and D, for example, so that the voice with the strong attack is assigned to layer A instead of layer D. Since layer A is sounded first, the sharpness of the attack will be retained. PERFORMANCE`JOB`Layer`Exchange A`†¥`A F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Use the [CS7] and [CS8] sliders to select the layers to be exchanged (A through D), then press [ENTER/YES] to begin the layer exchange procedure. The following confirmation display will appear: PERFORMANCE`JOB`Layer`Exchange Are`you`sure A`†¥`A Press [ENTER/YES] again to confirm that you want to go ahead with the layer exchange operation, or press [EXIT/NO] to cancel. When the data has been exchanged, "Completed!" will appear briefly on the display, then the display will return to the mode that was engaged prior to calling the layer exchange function. PERFORMANCE EDIT MODE / JOB 51