Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 142

1: KEY DATA INITIALIZE [VOICE] → [JOB] → [MENU] → 1:Key Data Initialize → [ENTER/YES] When you want to program a single drum key "from scratch," rather than editing an existing key, use this function to initialize all data for the specified drum key. DRUM`JOB`Key`Initialize````````Key BD6`````>``C1`` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Use the [CS7] slider or the keyboard to enter the drum key you want to initialize (C1 ... C5), then press [ENTER/YES] to begin the initialize procedure. The following confirmation display will appear: DRUM`JOB`Key`Initialize````````Key Are`you`sure`?`````````C1 Press [ENTER/YES] again to confirm that you want to go ahead with the initialize operation (which will erase all current edited data), or press [EXIT/ NO] to cancel. When the drum key data has been initialized, "Completed!" will appear briefly on the display, then the display will return to the mode that was engaged prior to calling the key data initialize function. DRUM VOICE EDIT MODE / JOB 141