Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 197

13: TRANSPOSE [SONG] → [A]~[H] → [SONG JOB] → [MENU] → 13:Transpose → [ENTER/YES] Transposes all notes in the specified track and range of measures up or down by the specified "offset" in semitones. This job is not available when the rhythm track (track 9) is selected. SONG`JOB`Transpose````````Meas``````Ofst 001ø`001```+0` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Meas (First & last measure numbers) Range: 001 ... 999 Controls: [CS6], [CS7], [-1] [+1], Dial Ofst (Offset) Range: -99 ... +99 Controls: [CS8], [-1] [+1], Dial Use the GROUP [A] through [H] keys to select the track on which the transpose operation is to be performed (A = track1, B = track 2, and so on). The LED of the selected track will glow red while the LEDs of all other tracks containing data glow green. Use [CS6] and [CS7] to specify the first and last measure numbers in the range of measures over which you want to transpose note data. Use [CS8] to set the number of semitones by which the notes will be transposed up or down. Minus (-) values transpose down while plus (+) values transpose up. Press [ENTER/YES] to begin the transpose procedure. The following confirmation display will appear: SONG`JOB`Transpose````````Meas``````Ofst Are`you`sure 001ø`001```+0` Press [ENTER/YES] again to confirm that you want to go ahead with the transpose operation, or press [EXIT/NO] to cancel. When the data has been transposed, "Completed!" will appear briefly on the display. 196 SONG EDIT MODE / SONG JOB