Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 24

LAYER DATA COPY [PERFORMANCE] → [EDIT] → [MENU] → 1:Layer → [ENTER/YES] → [COPY] This function facilitates performance editing by allowing the layer parameters from any layer in any other performance (the "source" performance) to be copied to the current layer. You can copy a layer setup that is close to the type you want, then edit it to produce the required sound. LAYER`COPY``````From`Performance```Layer A1:InitPerf`````B` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 From Performance Range: Any INTERNAL or CARD performance Controls: MEMORY, GROUP, PROGRAM, [CS5], [-1] [+1], Dial Layer Range: A, B, C, D Controls: [CS8], [-1] [+1], Dial Use the [INTERNAL 1], [INTERNAL 2], and [CARD] MEMORY keys to select the memory area from which the source performance is to be selected. Use the GROUP keys to select the source performance bank, then use the PROGRAM keys to select the source performance number. The [CS5] slider and other data entry controls can also be used to select the source performance number. Use the [CS8] slider to select the source layer. Once the source performance and layer has been selected, press the [ENTER/YES] key. "Are you sure?" will appear on the display. LAYER`COPY``````From`Performance```Layer Are`you`sure`?```````¡G1:InitPerf`````A Press the [ENTER/YES] key again to copy the layer data, or press [EXIT/ NO] to cancel the copy operation. Once the copy operation has finished, "Completed!" will appear on the display briefly, then the display will return to the layer edit mode. PERFORMANCE EDIT MODE / 1:Layer 23