Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 140

EFFECT DATA COPY [VOICE] → [EFFECT EDIT] → [COPY] This function facilitates drum voice effect editing by allowing the effect parameters from any other song, voice, or performance combination to be copied to the current drum voice. You can copy an effect setup that is close to the type you want, then edit it to produce the required sound. EFFECT`COPY`````From VCE``¡H8:DR`PTN F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 From Range: Any song, voice or performance combination Controls: MEMORY, GROUP, PROGRAM, [CS4], [CS5], [-1] [+1], Dial Use the [CS4] slider to select the mode containing the desired voice and effect data ("PFM" = PERFORMANCE, "VCE" = VOICE, and "MLT" = MULTI). Use the [INTERNAL 1], [INTERNAL 2], and [CARD] MEMORY keys to select the memory area from which the source voice is to be selected. Use the GROUP keys to select the source voice bank, then use the PROGRAM keys to select the source voice number. The [CS5] slider and other data entry controls can also be used to select the source voice number. Once the source voice has been selected, press the [ENTER/YES] key. "Are you sure?" will appear on the display. EFFECT`COPY`````From Are`you`sure`?``VCE``¡H8:DR`PTN Press the [ENTER/YES] key again to copy the effect data, or press [EXIT/ NO] to cancel the copy operation. Once the copy operation has finished, "Completed!" will appear on the display briefly, then the display will return to the effect edit mode. DRUM VOICE EDIT MODE / EFFECT EDIT 139