Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 200

16: GATE TIME MODIFY [SONG] → [A]~[H] → [SONG JOB] → [MENU] → 16:Gate Time Modify → [ENTER/YES] Increases or decreases the gate times (length) of all notes in the specified track and range of measures. This job is not available when the rhythm track (track 9) is selected. SONG`JOB`Gate`Modify`Meas``````Rate`Ofst 001ø`001``000%``+0` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Meas (First & last measure numbers) Range: 001 ... 999 Controls: [CS5], [CS6], [-1] [+1], Dial Rate (Gate time ratio) Range: 000 ... 200 Controls: [CS7], [-1] [+1], Dial Ofst (Offset) Range: -99 ... +99 Controls: [CS8], [-1] [+1], Dial Use the GROUP [A] through [H] keys to select the track on which the gate time modify operation is to be performed (A = track1, B = track 2, and so on). The LED of the selected track will glow red while the LEDs of all other tracks containing data glow green. Use [CS5] and [CS6] to specify the first and last measure numbers in the range of measures over which you want to modify the gate time data. Use [CS7] to set the "ratio" between the shorter and longer gate time values (a setting of "100%" maintains the original relationship between the notes, lower values produce a narrower gate time range, and higher values produce a broader gate time range). Use [CS8] to specify the amount of offset ("-" settings shorten the gate time while "+" settings increase the gate time). Press [ENTER/YES] to begin the gate time modify procedure. The following confirmation display will appear: SONG`JOB`Gate`Modify`Meas``````Rate`Ofst Are`you`sure`?```````001ø`001``000%``+0` Press [ENTER/YES] again to confirm that you want to go ahead with the gate time modify operation, or press [EXIT/NO] to cancel. When the gate time data has been modified, "Completed!" will appear briefly on the display. SONG EDIT MODE / SONG JOB 199