Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 193

10: ERASE MEASURE [SONG] → [A]~[H] → [SONG JOB] → [MENU] → 10:Erase Measure → [ENTER/YES] Erases all note and event data from the specified measure or range of measures in the specified track. This job is not available when the rhythm track (track 9) is selected. SONG`JOB`Erase`Measure`````````Meas 001ø`001` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Meas (First & last measure numbers) Range: 001 ... 999 Controls: [CS7], [CS8], [-1] [+1], Dial Use the GROUP [A] through [H] keys to select the track containing the measures you want to erase (A = track1, B = track 2, and so on). The LED of the selected track will glow red while the LEDs of all other tracks containing data glow green. Use the [CS7] and [CS8] sliders to select the numbers of the first and last measures in the range of measures you want to erase. Press [ENTER/YES] to begin the erase procedure. The following confirmation display will appear: SONG`JOB`Erase`Measure`````````Meas````` Are`you`sure 001ø`001` Press [ENTER/YES] again to confirm that you want to go ahead with the erase operation, or press [EXIT/NO] to cancel. When the data has been erased, "Completed!" will appear briefly on the display. An erase operation leaves the specified measures intact but blank. 192 SONG EDIT MODE / SONG JOB