Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 17

3: PAN [PERFORMANCE] → [EDIT] → [MENU] → 1:Layer → [ENTER/YES] → [ENTER/YES] → → [MENU] → 3:Pan → [ENTER/YES] In multi-layer performance combinations, interesting stereo effects can be produced by placing the output from different layers at different locations in the stereo sound field. The parameters in this screen determine the position in the stereo sound field in which the sound from each active layer will be heard (left to right). LAYER`Pan`L¯¯Æ¯¯R`````````ABCD ```````+0````````+0````````+0````````+0` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 The name of the currently selected voice/layer is shown in the upper right corner of the display. The characters "ABCD" to the right of the voice name indicate the status of each voice: a capital letter if the voice is on, a lower-case letter if the voice is muted, and a dash if the voice is off. Pan Range: -31 ... +31 Controls: [CS2], [CS4], [CS6], [CS8], [-1] [+1], Dial Use the [CS2], [CS4], [CS6], and [CS8] sliders to adjust the pan positions of the A, B, C, and D layer voices, respectively. Minus values represent panning to the left, and positive values represent panning to the right. "0" positions the sound of the selected layer in the center of the stereo sound field. Voices that are turned off are indicated by "---" on the display. The upper line of the display also shows a graphic representation of the stereo sound field with "L" representing "left" and "R" representing "right." As you change the pan value the vertical bar will appear at the corresponding position on the graphic display. 16 PERFORMANCE EDIT MODE / 1:Layer