Home » ZyXEL Manuals » Networking » ZyXEL P-660HW-67 » Manual Viewer

ZyXEL P-660HW-67 User Guide - Page 104

WAN Technical Reference

Get ZyXEL P-660HW-67 PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 104 highlights

Chapter 6 WAN Setup The following table describes the labels in this screen. Table 20 Network > WAN > More Connections: Edit: Advanced Setup LABEL DESCRIPTION RIP & Multicast Setup RIP Direction Select the RIP Direction from None, Both, In Only and Out Only. Version This field is not configurable if you select None in the RIP Direction field. Multicast ATM QoS ATM QoS Type Peak Cell Rate Sustain Cell Rate Maximum Burst Size MTU MTU Select the RIP Version from RIP-1, RIP-2B and RIP-2M. Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish membership in a multicast group. The ZyXEL Device supports IGMPv1 and IGMP-v2. Select None to disable it. Select CBR (Continuous Bit Rate) to specify fixed (always-on) bandwidth for voice or data traffic. Select UBR (Unspecified Bit Rate) for applications that are non-time sensitive, such as e-mail. Select nrtVBR (Variable Bit Rate-non Real Time) or rtVBR (Variable Bit Rate-Real Time) for bursty traffic and bandwidth sharing with other applications. Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to find the Peak Cell Rate (PCR). This is the maximum rate at which the sender can send cells. Type the PCR here. The Sustain Cell Rate (SCR) sets the average cell rate (long-term) that can be transmitted. Type the SCR, which must be less than the PCR. Note that system default is 0 cells/sec. Maximum Burst Size (MBS) refers to the maximum number of cells that can be sent at the peak rate. Type the MBS, which is less than 65535. The Maximum Transmission Unit (MTU) defines the size of the largest packet allowed on an interface or connection. Enter the MTU in this field. For ENET ENCAP, the MTU value is 1500. For PPPoE, the MTU value is 1492. Back Apply Cancel For PPPoA and RFC, the MTU is 100-1500. Click this to return to the previous screen without saving. Click this to save your changes. Click this to restore your previously saved settings. 6.4 WAN Technical Reference This section provides some technical background information about the topics covered in this chapter. 6.4.1 Encapsulation Be sure to use the encapsulation method required by your ISP. The ZyXEL Device supports the following methods. 104 ADSL Router Series User's Guide

Section	Page
ADSL Router Series	1
About This User's Guide	3
Document Conventions	5
Safety Warnings	7
Contents Overview	9
Table of Contents	11
User’s Guide	21
Introduction	23
1.1 Overview	23
1.2 Ways to Manage the ZyXEL Device	23
1.3 Good Habits for Managing the ZyXEL Device	24
1.4 Applications for the ZyXEL Device	24
1.4.1 Internet Access	24
1.5 Wireless Access	25
1.5.1 Using the WPS/WLAN Button	25
1.6 The RESET Button	26
1.6.1 Using the Reset Button	27
The Web Configurator	29
2.1 Overview	29
2.1.1 Accessing the Web Configurator	29
2.2 The Main Screen	31
2.2.1 Title Bar	31
2.2.2 Navigation Panel	32
2.2.3 Main Window	34
2.2.4 Status Bar	34
Status Screens	35
3.1 Overview	35
3.2 The Status Screen	36
Tutorials	41
4.1 Overview	41
4.2 Setting Up Your DSL Connection	41
4.3 IPv6 Address Configuration	43
4.3.1 6to4 Tunneling	44
4.4 Setting Up a Secure Wireless Network	45
4.4.1 Configuring the Wireless Network Settings	45
4.4.2 Using WPS	46
4.4.3 Connecting Wirelessly to your ZyXEL Device	50
4.5 Configuring the MAC Address Filter for Restricting Wireless Internet Access	52
4.6 Multiple Public and Private IP Address Mappings	54
4.6.1 Full Feature NAT + Many-to-Many No Overload Mapping	55
4.6.2 Full Feature NAT + One-to-One Mapping	57
4.7 Setting Up NAT Forwarding for a Game Server	58
4.7.1 Port Forwarding	58
4.8 Configuring Firewall Rules to Allow a Specified Service	60
4.9 Configuring Static Route for Routing to Another Network	63
4.10 Port Binding Configuration	65
4.10.1 Configuring ATM QoS for Multiple WAN Connections	65
4.10.2 Configuring Port Binding	67
4.11 Configuring QoS to Prioritize Traffic	68
4.12 Access the ZyXEL Device from the Internet Using DDNS	71
4.12.1 Registering a DDNS Account on www.dyndns.org	71
4.12.2 Configuring DDNS on Your ZyXEL Device	71
4.12.3 Testing the DDNS Setting	72
4.13 How to Use File Sharing on the ZyXEL Device	72
4.13.1 Set up file sharing	72
4.13.2 Access Your Shared Files From a Computer	73
4.14 How to Share a USB Printer via Your ZyXEL Device	74
Technical Reference	77
Internet and Wireless Setup Wizard	79
5.1 Overview	79
5.2 Internet Access Wizard Setup	79
5.2.1 Manual Configuration	82
5.3 Wireless Connection Wizard Setup	87
5.3.1 Manually Assign a WPA-PSK key	90
5.3.2 Manually Assign a WEP Key	90
WAN Setup	93
6.1 Overview	93
6.1.1 What You Can Do in the WAN Screens	93
6.1.2 What You Need to Know About WAN	93
6.1.3 Before You Begin	94
6.2 The Internet Access Setup Screen	95
6.2.1 Advanced Internet Access Setup	98
6.3 The More Connections Screen	100
6.3.1 More Connections Edit	101
6.3.2 Configuring More Connections Advanced Setup	103
6.4 WAN Technical Reference	104
6.4.1 Encapsulation	104
6.4.2 Multiplexing	105
6.4.3 VPI and VCI	106
6.4.4 IP Address Assignment	106
6.4.5 Nailed-Up Connection (PPP)	106
6.4.6 NAT	107
6.5 Traffic Shaping	107
6.5.1 ATM Traffic Classes	108
LAN Setup	109
7.1 Overview	109
7.1.1 What You Can Do in the LAN Screens	109
7.1.2 What You Need To Know About LAN	109
7.1.3 Before You Begin	110
7.2 The LAN IP Screen	110
7.2.1 The Advanced LAN IP Setup Screen	111
7.3 The DHCP Setup Screen	112
7.4 The Client List Screen	113
7.5 The IP Alias Screen	114
7.5.1 Configuring the LAN IP Alias Screen	115
7.6 The IPv6 Screen	116
7.7 LAN Technical Reference	119
7.7.1 LANs, WANs and the ZyXEL Device	119
7.7.2 DHCP Setup	119
7.7.3 DNS Server Addresses	119
7.7.4 LAN TCP/IP	120
7.7.5 RIP Setup	121
7.7.6 Multicast	121
Wireless LAN	123
8.1 Overview	123
8.1.1 What You Can Do in the Wireless LAN Screens	123
8.1.2 What You Need to Know About Wireless	123
8.1.3 Before You Start	124
8.2 The AP Screen	125
8.2.1 No Security	126
8.2.2 WEP Encryption	127
8.2.3 WPA(2)-PSK	128
8.2.4 Wireless LAN Advanced Setup	128
8.2.5 MAC Filter	130
8.3 The More AP Screen	131
8.3.1 More AP Edit	132
8.4 The WPS Screen	133
8.5 The WPS Station Screen	134
8.6 The WDS Screen	135
8.7 The Scheduling Screen	136
8.8 Wireless LAN Technical Reference	137
8.8.1 Wireless Network Overview	137
8.8.2 Additional Wireless Terms	139
8.8.3 Wireless Security Overview	139
8.8.4 Signal Problems	141
8.8.5 BSS	142
8.8.6 MBSSID	142
8.8.7 Wireless Distribution System (WDS)	143
8.8.8 WiFi Protected Setup (WPS)	143
Network Address Translation (NAT)	151
9.1 Overview	151
9.1.1 What You Can Do in the NAT Screens	151
9.1.2 What You Need To Know About NAT	151
9.2 The NAT General Setup Screen	152
9.3 The Port Forwarding Screen	153
9.3.1 Configuring the Port Forwarding Screen	154
9.3.2 The Port Forwarding Rule Edit Screen	155
9.4 The Address Mapping Screen	156
9.4.1 The Address Mapping Rule Edit Screen	157
9.5 The ALG Screen	158
9.6 NAT Technical Reference	159
9.6.1 NAT Definitions	159
9.6.2 What NAT Does	160
9.6.3 How NAT Works	160
9.6.4 NAT Application	161
9.6.5 NAT Mapping Types	161
Firewall	163
10.1 Overview	163
10.1.1 What You Can Do in the Firewall Screens	163
10.1.2 What You Need to Know About Firewall	164
10.2 The Firewall Screen	166
10.3 The Firewall General Screen	167
10.4 The Default Action Screen	168
10.5 The Rules Screen	169
10.5.1 The Rules Add Screen	170
10.5.2 Customized Services	172
10.5.3 Configuring a Customized Service	172
10.6 The DoS Screen	174
10.6.1 The DoS Advanced Screen	174
10.6.2 Configuring Firewall Thresholds	175
10.7 Firewall Technical Reference	176
10.7.1 Firewall Rules Overview	176
10.7.2 Guidelines For Enhancing Security With Your Firewall	177
10.7.3 Security Considerations	178
10.7.4 Triangle Route	178
Filters	181
11.1 Overview	181
11.1.1 What You Can Do in the Filter Screens	181
11.1.2 What You Need to Know About Filtering	181
11.2 The URL Filter Screen	182
11.3 The Application Filter Screen	183
11.4 The IP/MAC Filter Screen	184
11.5 IPv6/MAC Filter	186
Certificate	189
12.1 Overview	189
12.1.1 What You Can Do in this Chapter	189
12.2 What You Need to Know	189
12.3 The Trusted CA Screen	189
12.3.1 View Trusted CA Certificate	191
12.3.2 Import Trusted CA Certificate	192
Static Route	193
13.1 Overview	193
13.1.1 What You Can Do in the Static Route Screens	194
13.2 The Static Route Screen	194
13.2.1 Static Route Edit	195
13.2.2 IPv6 Static Route	196
13.2.3 IPv6 Static Route Edit	197
Port Binding	199
14.1 Overview	199
14.1.1 What You Can Do in the Port Binding Screens	200
14.2 The Port Binding Screen	200
14.2.1 Port Binding Summary Screen	201
802.1Q/1P	203
15.1 Overview	203
15.1.1 What You Can Do in the 802.1Q/1P Screens	203
15.1.2 What You Need to Know About 802.1Q/1P	203
15.2 The 802.1Q/1P Group Setting Screen	204
15.2.1 Editing 802.1Q/1P Group Setting	206
15.3 The 802.1Q/1P Port Setting Screen	207
Quality of Service (QoS)	209
16.1 Overview	209
16.1.1 What You Can Do in the QoS Screens	209
16.1.2 What You Need to Know About QoS	210
16.2 The General Screen	210
16.2.1 The QoS Summary List Screen	211
16.3 The Queue Setup Screen	212
16.4 The Class Setup Screen	213
16.5 QoS Technical Reference	215
16.5.1 IEEE 802.1p	215
16.5.2 IP Precedence	215
16.5.3 Automatic Priority Queue Assignment	216
Dynamic DNS Setup	217
17.1 Overview	217
17.1.1 What You Can Do in the DDNS Screen	217
17.1.2 What You Need To Know About DDNS	217
17.2 The Dynamic DNS Screen	218
Remote Management	219
18.1 Overview	219
18.1.1 What You Can Do in the Remote Management Screens	219
18.1.2 What You Need to Know About Remote Management	220
18.2 The WWW Screen	220
18.2.1 Configuring the WWW Screen	221
18.3 The Telnet Screen	221
18.4 The FTP Screen	222
18.5 The SNMP Screen	223
18.5.1 Configuring SNMP	225
18.6 The DNS Screen	225
18.7 The ICMP Screen	226
18.8 The SSH Screen	227
18.8.1 SSH Example	228
Universal Plug-and-Play (UPnP)	230
19.1 Overview	230
19.1.1 What You Can Do in the UPnP Screen	230
19.1.2 What You Need to Know About UPnP	230
19.2 The UPnP Screen	231
19.3 Installing UPnP in Windows Example	232
19.4 Using UPnP in Windows XP Example	235
File Sharing	241
20.1 Overview	241
20.1.1 What You Can Do in this chapter	241
20.1.2 What You Need to Know	241
20.1.3 Before You Begin	242
20.2 The File Sharing Screen	243
20.2.1 User Edit	244
Sharing a USB Printer	245
21.1 Overview	245
21.1.1 What You Can Do in this chapter	245
21.2 What You Need to Know	245
21.3 Before You Begin	246
21.4 The Print Server Screen	246
21.5 Add a New Printer Using Windows	247
21.6 Add a New Printer Using Macintosh OS X	251
21.6.1 Mac OS 10.3 and 10.4	251
21.6.2 Mac OS 10.5 and 10.6	254
CWMP	259
22.1 Overview	259
22.2 The CWMP Setup Screen	260
System Settings	263
23.1 Overview	263
23.1.1 What You Can Do in the System Settings Screens	263
23.2 The General Screen	263
23.3 The Time Setting Screen	264
Logs	267
24.1 Overview	267
24.1.1 What You Need To Know About Logs	267
24.2 The View Log Screen	267
24.3 The Log Settings Screen	268
Tools	271
25.1 Overview	271
25.1.1 What You Can Do in the Tool Screens	271
25.2 The Firmware Screen	271
25.3 The Configuration Screen	273
25.4 The Restart Screen	275
Diagnostic	277
26.1 Overview	277
26.1.1 What You Can Do in the Diagnostic Screens	277
26.2 The General Screen	277
26.3 The DSL Line Screen	278
Troubleshooting	281
27.1 Power, Hardware Connections, and LEDs	281
27.2 ZyXEL Device Access and Login	282
27.3 Internet Access	283
Product Specifications	285
28.1 Hardware Specifications	285
Setting up Your Computer’s IP Address	287
IP Addresses and Subnetting	309
Pop-up Windows, JavaScripts and Java Permissions	317
Wireless LANs	327
IPv6	341
Services	351
Legal Information	355

Match case Limit results 1 per page

Chapter 6 WAN Setup

ADSL Router Series User’s Guide

104

The following table describes the labels in this screen.

6.4

WAN Technical Reference

This section provides some technical background information about the topics covered in this

chapter.

6.4.1

Encapsulation

Be sure to use the encapsulation method required by your ISP. The ZyXEL Device supports the

following methods.

Table 20

Network > WAN > More Connections: Edit: Advanced Setup

LABEL

DESCRIPTION

RIP & Multicast Setup

RIP Direction

Select the

RIP Direction

from

None

Both

In Only

and

Out Only

Version

This field is not configurable if you select

None

in the

RIP Direction

field.

Select the

RIP Version

from

RIP-1

RIP-2B

and

RIP-2M

Multicast

Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to

establish membership in a multicast group. The ZyXEL Device supports

IGMP-

and

IGMP-v2

. Select

None

to disable it.

ATM QoS

ATM QoS Type

Select

CBR

(Continuous Bit Rate) to specify fixed (always-on) bandwidth for

voice or data traffic. Select

UBR

(Unspecified Bit Rate) for applications that are

non-time sensitive, such as e-mail. Select

nrtVBR

(Variable Bit Rate-non Real

Time) or

rtVBR

(Variable Bit Rate-Real Time) for bursty traffic and bandwidth

sharing with other applications.

Peak Cell Rate

Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to find the Peak

Cell Rate (PCR). This is the maximum rate at which the sender can send cells.

Type the PCR here.

Sustain Cell Rate

The Sustain Cell Rate (SCR) sets the average cell rate (long-term) that can be

transmitted. Type the SCR, which must be less than the PCR. Note that system

default is 0 cells/sec.

Maximum Burst Size

Maximum Burst Size (MBS) refers to the maximum number of cells that can be

sent at the peak rate. Type the MBS, which is less than 65535.

MTU

The Maximum Transmission Unit (MTU) defines the size of the largest packet

allowed on an interface or connection. Enter the MTU in this field.

For ENET ENCAP, the MTU value is 1500.

For PPPoE, the MTU value is 1492.

For PPPoA and RFC, the MTU is 100-1500.

Back

Click this to return to the previous screen without saving.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.