ZyXEL P-660HW-67 User Guide - Page 155

Chapter 9 Network Address Translation (NAT) Table 42 Network > NAT > Port Forwarding (continued) LABEL DESCRIPTION Active This field indicates whether the rule is active or not. Service Name Start Port End Port Port Translation Clear the check box to disable the rule. Select the check box to enable it. This is a service's name. This is the first port number that identifies a service. This is the last port number that identifies a service. This is the start/end port number that the device translates. Start/End Port Server IP Address Modify This is the server's IP address. Click the edit icon to go to the screen where you can edit the port forwarding rule. Back Apply Cancel Click the delete icon to delete an existing port forwarding rule. Note that subsequent address mapping rules move up by one when you take this action. Click this to return to the previous screen without saving. Click this to save your changes. Click this to restore your previously saved settings. 9.3.2 The Port Forwarding Rule Edit Screen Use this screen to edit a port forwarding rule. Click the rule's edit icon in the Port Forwarding screen to display the screen shown next. Figure 64 Network > NAT > Port Forwarding: Edit The following table describes the fields in this screen. Table 43 Network > NAT > Port Forwarding: Edit LABEL DESCRIPTION Rule Setup Active Click this check box to enable the rule. Service Name Enter a name to identify this port-forwarding rule. Start Port Enter a port number in this field. To forward only one port, enter the port number again in the End Port field. To forward a series of ports, enter the start port number here and the end port number in the End Port field. ADSL Router Series User's Guide 155