ZyXEL P-660HW-67 User Guide - Page 185

Security > Filter > IP/MAC Filter

Page 185 highlights

Chapter 11 Filters Table 60 Security > Filter > IP/MAC Filter (continued) LABEL DESCRIPTION Rule Type Select IP or MAC type to configure the rule. Use the IP Filter to block or allow traffic by IP addresses. Source IP Address Subnet Mask Port Number Destination IP Address Subnet Mask Port Number Source MAC Address Use the MAC Filter to block or allow traffic by MAC address. Enter the source IP address of the packets you wish to filter. This field is ignored if it is 0.0.0.0. Enter the IP subnet mask for the source IP address Enter the source port of the packets that you wish to filter. The range of this field is 0 to 65535. This field is ignored if it is 0. Enter the destination IP address of the packets you wish to filter. This field is ignored if it is 0.0.0.0. Enter the IP subnet mask for the destination IP address. Enter the destination port of the packets that you wish to filter. The range of this field is 0 to 65535. This field is ignored if it is 0. This field is only available when you select MAC in the Rule Type field. Protocol IP Filter Listing IP Filter Rule Index # Active Interface Direction Src Address/Mask Dest IP/Mask Mac Address Src Port Dest Port Protocol Apply Delete Cancel Enter the MAC address of the packets you wish to filter. Select ICMP, TCP or UDP for the upper layer protocol. Select the index number of the filter set from the drop-down list box. This is the index number of the rule in a filter set. This field shows whether the rule is activated. This is the interface that the filter set applies to. The filter set applies to this traffic direction. This is the source IP address and subnet mask when you select IP as the rule type. This is the destination IP address and subnet mask. This is the MAC address of the packets being filtered. This is the source port number. This is the destination port number. This is the upper layer protocol. Click this to apply your changes. Click this to remove the filter rule. Click this to restore your previously saved settings. ADSL Router Series User's Guide 185

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
  • 371
  • 372

Chapter 11 Filters
ADSL Router Series User’s Guide
185
Rule Type
Select
IP
or
MAC
type to configure the rule.
Use the
IP
Filter to block or allow traffic by IP addresses.
Use the
MAC
Filter to block or allow traffic by MAC address.
Source IP Address
Enter the source IP address of the packets you wish to filter. This field is
ignored if it is 0.0.0.0.
Subnet Mask
Enter the IP subnet mask for the source IP address
Port Number
Enter the source port of the packets that you wish to filter. The range of this
field is 0 to 65535. This field is ignored if it is 0.
Destination IP Address
Enter the destination IP address of the packets you wish to filter. This field is
ignored if it is 0.0.0.0.
Subnet Mask
Enter the IP subnet mask for the destination IP address.
Port Number
Enter the destination port of the packets that you wish to filter. The range of
this field is 0 to 65535. This field is ignored if it is 0.
Source MAC Address
This field is only available when you select
MAC
in the
Rule Type
field.
Enter the MAC address of the packets you wish to filter.
Protocol
Select
ICMP
,
TCP
or
UDP
for the upper layer protocol.
IP Filter Listing
IP Filter Rule Index
Select the index number of the filter set from the drop-down list box.
#
This is the index number of the rule in a filter set.
Active
This field shows whether the rule is activated.
Interface
This is the interface that the filter set applies to.
Direction
The filter set applies to this traffic direction.
Src Address/Mask
This is the source IP address and subnet mask when you select
IP
as the rule
type.
Dest IP/Mask
This is the destination IP address and subnet mask.
Mac Address
This is the MAC address of the packets being filtered.
Src Port
This is the source port number.
Dest Port
This is the destination port number.
Protocol
This is the upper layer protocol.
Apply
Click this to apply your changes.
Delete
Click this to remove the filter rule.
Cancel
Click this to restore your previously saved settings.
Table 60
Security > Filter > IP/MAC Filter
(continued)
LABEL
DESCRIPTION