Belkin F5D7632-4_V3000 User Manual - Page 71
IP address tab. Click OK.
View all Belkin F5D7632-4_V3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Setting Up your Computers 1 2 3 4 4. Write down the IP address and subnet mask from the "IP Address" tab (3). 5. Click the "Gateway" tab (2). Write down the gateway address in the chart. 5 6. Click the "DNS Configuration" tab (1). Write down the DNS address(es) in the chart. 6 7. If not already selected, select "Obtain an IP address automatically" on the IP address tab. Click "OK". 7 Restart the computer. When the computer restarts, your network 8 adapter(s) are now configured for use with the Router. 9 Set up the computer that is connected to the cable or DSL modem by FIRST using these steps. You can also use these steps to add computers to your 10 Router after the Router has been set up to connect to the Internet. section 71
Setting Up your Computers
71
section
2
1
3
4
5
6
7
8
9
10
4.
Write down the IP address and subnet mask
from the “IP Address” tab (3).
5.
Click the “Gateway” tab (2). Write down the gateway address in the chart.
6.
Click the “DNS Configuration” tab (1). Write down the DNS address(es) in
the chart.
7.
If not already selected, select “Obtain an IP address automatically” on the
IP address tab. Click “OK”.
Restart the computer. When the computer restarts, your network
adapter(s) are now configured for use with the Router.
Set up the computer that is connected to the cable or DSL modem by FIRST
using these steps. You can also use these steps to add computers to your
Router after the Router has been set up to connect to the Internet.