Brother International HL-2600CN Service Manual - Page 10
Warning, Caution, Hazardous Voltage, Harmful Ozone Gas, Hot Surface, Rotating Parts
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
WARNING HAZARDOUS VOLTAGE May cause serious injuries or fatal accidents. Voltage is now applied from the power supply of printer. There is a danger of electrical shock if you touch the active area inside the printer. Be sure to turn the power supply switch OFF and pull the plug out from the power outlet before starting maintenance work on the printer. WARNING HARMFUL OZONE GAS Inhalation of an excessive amount of ozone gas may adversely affect the respiratory organs. An Ozone Filter is fitted to this printer to reduce the exhausted ozone. This filter must be replaced with a new filter periodically in accordance with the manual supplied with the printer. WARNING HOT SURFACE The Fusing Unit reaches a temperature of approx.170°C and adjacent parts are also very hot. When you need to change the cleaning pad or remove jammed paper, wait about 20 minutes after opening the paper exit unit to allow the unit to cool down. CAUTION ROTATING PARTS Be aware of the potential danger of various rollers and take care not to get your fingers or hand caught into the machine, this can cause serious injuries. Note that the exit roller that ejects the printed paper is rotating while printing. Be careful not to get your hair, fingers, hands, sleeve or necktie caught in the machine while operating the machine. iv