Brother International HL-2600CN Service Manual - Page 363

Be sure not to damage the surface of the transfer drum 2 with a vacuum cleaner when cleaning the areas around the transfer drum 2. Be sure not to contact the nozzle of the vacuum cleaner with the terminals of the interior. Failure to do so will cause damage to the electrical parts in the printer. It is recommended to ground the nozzle of the vacuum cleaner by using the earth wire. 4) Media cassette i) Remove the media cassette from the printer and remove paper from the cassette. ii) Vacuum paper dust in the media cassette. iii) Reinstall the media cassette. Media cassette 6.6 Packing 1) Re-install the fusing unit into the printer. i) After setting the fusing unit in place, lightly press down the unit to firmly connect to the connector on the base. ii) Tighten the securing screws while pressing down the fusing unit. Check the metal hook of the screw at the left hand secures the fusing unit correctly. iii) Close the rear access cover and top cover ASSY 2. Fusing unit A-17