Brother International HL-2600CN Service Manual - Page 137

Code No. 00 01 02 LCD Message 00 READY [*1] [*2 ] [*4] 01 WAIT [*2 [*1] ] [*4] 02 PRINT [*5][*1] [*2 ] [*4] Description of Message The Power LED is lit. The engine has completed the warming-up process and is now ready to print. The engine is ready to receive "PRREQ", signal from LPC. [*1]: Applicable paper feeder is indicated as follows; /UPP: Upper Cassette /LOW: Lower Cassette [*2]: Size of the paper loaded on the upper or lower cassette is indicated as follows. Indication to be displayed from the left in the order of upper cassette, lower cassette. LT: Letter size DL: Envelope EX: Executive size CM: Envelope PC: Post Card Commercial #10 LG: Legal size FR: Free size A4: A4 size B5: B5 size [*4]: The code numbers of consumables or periodical replacement parts will be indicated if they have reached their life or should be replaced now. If no periodical replacement is required, there will be no indication in the LCD. For details of the periodical replacement parts, see 36. CLEAR CARE in the next section. The Power LED is lit. The engine is in the process of warming-up. For messages [*1], [*2] and [*4] that appearing in the LCD, see the description of code number 00 above. The Power LED lit. The engine is ready to print. For messages [*1], [*2], [*3] and [*4] that appearing in the LCD, see the description of code number 00 above. [*5]: Print color is indicated as follows; Y: Yellow M: Magenta C: Cyan K: Black YM: Yellow & Magenta YMCK Full Color V-12