Brother International HL-2600CN Service Manual - Page 253
Paper Sensor D. EN, Rear Cover 2 / Rear Cover U 2, Remove the rear cover 2 from the frame.
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
4.3.8 Paper Sensor (D. EN) 1) Disconnect the connector (1 pc.) connected to the paper sensor (D. EN). 2) Release the three hooks inside the frame to remove the paper sensor (D. EN) from the frame. Hook Hook Paper sensor (D. EN) Fig.7-58 4.3.9 Rear Cover 2 / Rear Cover (U) 2 1) Remove the set screw BT4X8 (1 pc.) of rear cover 2. 2) Remove the rear cover 2 from the frame. 3) Push the two hooks downwards to release them and remove the rear cover (U) 2 from the frame. Rear cover (U) 2 Hook Fig.7-59 VII-42 Rear cover 2
VII-42
4.3.8
Paper Sensor (D. EN)
1)
Disconnect the connector (1 pc.) connected to the paper sensor (D. EN).
2)
Release the three hooks inside the frame to remove the paper sensor (D. EN) from
the frame.
Fig.7-58
4.3.9
Rear Cover 2 / Rear Cover (U) 2
1) Remove the set screw BT4X8 (1 pc.) of rear cover 2.
2) Remove the rear cover 2 from the frame.
3) Push the two hooks downwards to release them and remove the rear cover (U) 2
from the frame.
Fig.7-59
Hook
Hook
Rear cover (U) 2
Rear cover 2
Hook
Paper sensor (D. EN)