Brother International HL-2600CN Service Manual - Page 154

43 MARGIN ADJUST The position of the top margin and left margin can be confirmed and adjusted within the range -3.5mm max. and +3.5mm max. Procedure Description of Procedures 1) Press the Reprint button after selecting "MARGIN ADJUST". (a) (b) 2) Using the Back or Set button, select either a) TOP or LEFT1/LEFT3 and then press the Reprint button. (b) (c) LEFT: For adjustment of left edge of upper cassette. b) LEFT1: For adjustment of left edge of lower cassette. LEFT3: For adjustment of left edge from duplex unit. c) 3) The margins can be adjusted by up to 3.5mm left and right in 0.5mm steps from the reference value "0". Using the Back or Set button, select the d) amount of adjustment by selecting a number displayed in screen (c) or (d). The amount of adjustment selected will be displayed at the upper right corner of Screen (c) or (d). After confirming the desired amount of e) adjustment is displayed, press the Reprint button to set the adjustment. 4) Press the - button to exit the MARGIN ADJUST mode. (d) (e) f) 5) Press the - button one more time to return to FACTORY MODE. (e) (f) LCD Message 39 FACTORY MODE MARGIN ADJUST 43 MARGIN ADJUST TOP/LEFT/LEFT1/ NONE/LEFT3 43 TOP -2.0mm -+ 43 TOP +2.5mm -+ 43 MARGIN ADJUST TOP/LEFT/LEFT1/ NONE/LEFT3 39 FACTORY MODE DP CHECK V-29