Brother International HL-2600CN Service Manual - Page 295
Inner Jam, Outer Jam, Others, Paper Exit Unit
![]() |
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
3.2 Inner Jam Problem Item Transfer unit 2 Step 1 2 Check Item Open the transfer unit 2 and check. Is there any paper inside the unit? Is the transfer roller 2 firmly locked by the lock lever? 3 Is the paper discharger unit installed in place? 4 Is there paper dust around the registration roller 2? Fusing Unit 5 Is the wire of the paper discharger unit damaged? Is the fusing unit installed in 6 place? Is there any paper trapped 7 between the rollers? 8 Is there fuser oil still in the oil bottle? Result Action YES NO NO YES YES NO YES NO Remove the paper inside. Fix the transfer roller 2 with the lock lever. Install the paper discharger unit firmly in place. Clean the registration roller 2 with a cotton cloth. Replace the existing paper discharger unit with a new one. Install the fusing unit firmly in place. Remove the trapped paper. Replace the existing oil bottle with a new one. 3.3 Outer Jam Problem Item Print Paper Paper Exit Unit Step 1 1 2 Check Item Is the print paper a recommended paper? Is the paper exit unit firmly locked by the lock lever? Is there paper dust around the exit roller? Result NO NO YES Action Use a recommended paper. Open and close the paper exit unit again. Clean the exit roller with a cotton cloth. 3.4 Others Problem Item The edge of print paper is creased. Cause Is the curled paper edge creased when the paper is loaded through the pick-up roller? Result Action YES Turn over the paper in the media cassette.
![](/manual_guide/products/brother-international-hl2600cn-service-manual-a175c80/295.png)