Brother International HL-2600CN Service Manual - Page 44

3. INSTALLATION WORK Install the unit parts of the starter kit into the printer according to the following procedures: 3.1 Install the Fuser Cleaner and Oil Bottle 1) Open the paper exit cover. Pressure has been released by the fusing release lever between the fuser roller and back-up roller while the transportation and storage. Release the fusing release lever. Fusing release lever Paper exit cover CAUTION Do attempt to loosen the oil bottle's cap, because loose cap is likely to cause the oil leakage. 2) Open the retainer lock lever of oil bottle and the fuser cleaner. 3) Install the oil bottle to the fusing unit. Fusing oil bottle 4) Install the fuser cleaner to the fusing unit. 5) Hold the fuser cleaner with the retainer lock lever. 6) Close the paper exit cover. Fig.3-4 Fuser cleaner III-5 Lock lever Fig.3-5