Brother International HL-2600CN Service Manual - Page 183
Cleaning the OPC Belt Cartridge, <Tools to Prepare>, <Cleaning Procedure>, 35&$87
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
1.2.4 Cleaning the OPC Belt Cartridge The OPC belt cartridge should be cleaned according to the periodic maintenance cleaning cycle set out in Table 6-3. If the belt is exposed for more than two minutes to a light source of 800 lux, the belt may be damaged. Do not directly touch the OPC belt surface with bare hands or gloves. Cotton cloth (2 3 pieces) 1) Turn off the remote switch. 2) Open the paper exit unit cover 2 and the paper exit front cover 2. 3) Release the belt cartridge lock levers to pull out the OPC belt cartridge. 4) Clean the OPC belt cartridge with a cotton cloth. i) Remove any toner on the back of the OPC belt cartridge. OPC belt cartridge Fig.6-8 VI-12
VI-12
1.2.4
Cleaning the OPC Belt Cartridge
The OPC belt cartridge should be cleaned according to the periodic maintenance
cleaning cycle set out in Table 6-3.
35(&$87,21
If the belt is exposed for more than two minutes to a light
source of 800 lux, the belt may be damaged.
Do not directly touch the OPC belt surface with bare
hands or gloves.
<Tools to Prepare>
Cotton cloth (2
3 pieces)
<Cleaning Procedure>
1)
Turn off the remote switch.
2)
Open the paper exit unit cover 2 and the paper exit front cover 2.
3)
Release the belt cartridge lock levers to pull out the OPC belt cartridge.
4)
Clean the OPC belt cartridge with a cotton cloth.
i)
Remove any toner on the back of the OPC belt cartridge.
Fig.6-8
OPC belt cartridge