Brother International HL-2600CN Service Manual - Page 190
Toner Empty K, Fuser Oil Low, Waste Toner, Replace Fcr, Oil Empty, Replace Opc Belt, Change Fcr
![]() |
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
*1: These figures are based on an average of 5% coverage of the printable area for one color using laser paper. The frequency of replacement will vary, depending on the complexity of the prints, the percentage of coverage, and the type of media. Transparencies, glossy coated paper, and other specialty media will result in shortened consumable life. *2: You can order these item as a 120K Kit (include. transfer roller 2 / paper discharger unit / drum cleaner 2 / ozone filter / paper pick-up roller / separator pad 2 / transfer drum 2) (LM0085001) ** After completing maintenance work, clear the message displayed on the control panel. (Refer to the list below.) LCD Maintenance Message (Toner nearly empty) KCMY (Toner nearly empty) KCMY FUSER OIL LOW REPLACE FCR REPLACE OPC BELT REPLACE FUSER REPLACE 120K KIT Consumables Toner cartridge Black Toner cartridge Cyan, Magenta, or Yellow Oil Bottle Fuser Cleaner OPC Belt Cartridge Fusing Unit Drum Cleaner 2/ Paper Discharger / Transfer Roller 2 / Paper Pick-up Roller / Separator Pad 2/ Transfer Drum 2 LCD Operator Call Message TONER EMPTY K Consumables Toner cartridge Black TONER EMPTY CMY Toner cartridge Cyan, Magenta, or Yellow WASTE TONER OIL EMPTY CHANGE FCR Waste Toner Pack Oil Bottle Fuser Cleaner VI-19
![](/manual_guide/products/brother-international-hl2600cn-service-manual-a175c80/190.png)