Brother International HL-2600CN Service Manual - Page 279
DANGER, Note in Parts Replacement]
![]() |
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
4.7 Fusing Unit DANGER [Note in Parts Replacement] The fuser unit consists of important safety parts. Replacement of parts or disassembly and maintenance work should only be done at an appropriate service facility by skilled service personnel acquainted with electrical safety. After re-assembly the product safety should be reconfirmed. Since the fuser unit is very hot, make sure that the fuser unit and surrounding area are well cooled down prior to starting the replacement of parts. You may get burned when touching hot areas. The fusing unit contains silicone oil. Take care not to spill the silicone oil, especially on the floor, as the floor will become very slippery and dangerous. 1) Remove the set screw ST3X6 (1 pc.) to remove the fuser cover (R) from the fusing unit. 2) Remove the set screw ST3X6 (1 pc.) to remove the fuser cover (L) from the fusing unit. 3) Remove the set screws ST3X6 (2 pcs.) to remove the fuser cover B from the fusing unit. 4) Remove the set screws ST3X6 (3 pcs.) to remove the BR felt ASSY 2 from the fusing unit. 5) Remove the set screws (2 pcs.) to remove the fu paper guide from the fusing unit. Fuser cover (L) Fu paper guide Fuser cover (B) Fusing unit Fig.7-97 BR felt ASSY 2 Fuser cover (R) VII-68
![](/manual_guide/products/brother-international-hl2600cn-service-manual-a175c80/279.png)